Heating rods/Cartridge heaters
The construction of our cartridge heaters makes them ideal for use in applications with vibrations and high
temperatures; they can withstand over 500° on the surface of the cartridge.
High-density heating rods are ideal in installations where high power is needed in minimal space.
• Flexible cables in standard models:
Standard length is 250 mm fiberglass or silicone wires,
With thermoelement FeCu/Ni (J), PTFE insulation) 1000 mm fiberglass or silicone conductors
• Standard diameters:
Ø6,50 - 8 - 10 - 12,50 - 16 - 20 mm
• Ø Tolerance: -0.02 -0.06 up to 1,000 mm length. Over 1,000 mm + -0.06. / over 1500 mm + -0.10 mm
• Standard diameters in inches (")
1/8"(3,18 mm) 1/4"(6,35 mm) 5/16"(7,95 mm) 3/8"(9,52 mm) 1/2"(12,70 mm) 5/8"(15,90 mm) 3/4"(19,05 mm)
• Standard Volt: 12-24-48-60-115-230-400V
• We can supply any diameter between 3 mm and 25 mm.
• Other diameters upon request.
• TIG welded stainless steel tube.
• Flexible fiberglass insulated nickel wires.
• Core and insulation of compressed magnesium oxide.
• Heating wire Ni/Cr80/20.
• Quality control:
Insulation: 5 MOhm at 500 V DC cold (minimum).
Dielectric strength: 1500 V 1 second.
Nominal power: + 5% - 10%
Standard tilslutninger
Standard Nikkel ledninger 350°C
Epoxy forsegling/Teflon ledninger
Split cartridge heater
The split heating rod is ideal where there is insufficient space for mounting the heating cartridge. The split design allows the heating cartridge to be easily removed when cold. The heating rod expands and fits into the bore, which is why it does not require thermal paste. This avoids drilling, damaging, and performing costly and time-consuming work to remove the cartridge. You can reuse the expanding heating elements in other molds that need to be heated.
Standard Diameter in mm: Ø10-12-12,5-15-16-20-25mm
Standard diameter in inches: Ø3/8"-1/2"-5/8"-3/4"-1"
Standard volt: 120-130-240-380-400V